www.8devices.com
|
|
|
Page 1 of 1
|
[ 1 post ] |
|
error in boot when usb device is connected
Author |
Message |
carambolage
Joined: 08 Jul 2013, 08:20 Posts: 1
|
Hi All,
i have some problems with the usb connection. I have tested five brand new carambola modules. I put them in the evalboard when a usb-webcam (or usb-mouse) is connected. Then i switch on the modul and the bootconsole starts. During the boot i get on tree modules the error message 'dwc_otg: Device Not Supported' (ifinit times) on the two other modules there is no error and the usb device is detected.
Wenn i start the 'error boards' with no usb devise plugged in, it starts normally without errors. Whenn the openWRT is running and then i plugged in the usb device there is no reaction, to the usb-device (no detection).
Where is the error? The five modules are direct, from the packet, from 8devices, with all the same firmware.
I attach the logdata from booting.
carambolage
|
08 Jul 2013, 08:38 |
|
|
|
Page 1 of 1
|
[ 1 post ] |
|
Who is online |
Users browsing this forum: No registered users |
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum
|
|